描述
| 料號 | 產品名稱 | 系列 | 顏色 | 材質 | 用途 | 條碼 |
| BBT-001/B | TK SHIM Fixing Bolt Tool | Tool | 陽極紅 | 鋁合金 | Shimano 曲柄鎖固工具 | 811780021013 |
| BBT-004 | TK HT Multi-Outer | Tool | 灰 | 合金鋼 | 外露式五通軸承工具襯套組 | 810191011798 |
| BBT-013 | TK DT Ratchet SD HBG Kit | Tool | 灰 | 合金鋼 | DT ratchet tool, seal driver, hub guides | 811780024656 |
| BBT-015 | TK Pro TT BB86/92/BSA30 Tool | Tool | 金 | 鋁合金 | BB86/92/24mm Adapt/BSA30 TorqTite 五通軸承專用套筒 | 810191010449 |
| BBT-025 | TK Pro TT PF30 Tool | Tool | 金 | 鋁合金 | PF30/BB386 TorqTite pro cup tool 五通軸承專用套筒 | 810191010470 |
| BBT-100 | TK Universal Puller | Tool | 銀/黑 | 合金鋼 | Blind Hole Puller Set 花鼓/避震器通用盲孔抽拉工具 | 810191011200 |
| BRT-002 | TK BB30/PF30 Tool | Tool | 金 | 鋁合金 | 30mm ID BB Press/Remove 五通軸承拆組工具 | 810191019084 |
| BRT-003 | TK BB86/92 Tool | Tool | 金 | 鋁合金 | 24mm ID BB Press/Remove 五通軸承拆組工具 | 810191019985 |
| BRT-005 | TK Bearing Press | Tool | 金/灰 | 鋁合金/合金鋼 | Bearing Press Tool Set 培林迫緊工具 | 810191012573 |
| BBT-001/B | TK SHIM Fixing Bolt Tool |
| External BB Tools – Shimano crank fixing bolt | |
| Tool for securing the crank fixing bolt on Shimano cranksets. Designed with a 3/8″ drive on the back for torque wrench/breaker bar attachment. | |
| BBT-004 | TK HT Multi-Outer |
| External BB Tools – Pilot Bushing Set | |
| Toolset that includes outer guides for all the most common bearing sizes. | |
| ✪ Can be used in conjunction with our Hub Press Tool (BRT-005). | |
| BBT-013 | TK DT Ratchet SD HBG Kit |
| Hub Service Tools – DT Swiss | |
| This tool set is designed to fully service DT Swiss hubs and other hub manufacturers that utilize DT Swiss hub internals. The set includes all the bearing guide sizes for front and rear hubs, two low-drag silicone freehub seals and a high-quality, ratchet removal tool. | |
| BBT-015 | TK Pro TT BB86/92/BSA30 Tool |
| BBT-025 | TK Pro TT PF30 Tool |
| Bottom Bracket Tools – TorqTite and T47 Cup Tools | |
| These tools allow you install TorqTite and T47 bottom brackets. They feature a 3/8″ drive on the backside for use with a torque wrench or breaker bar. BBT-015 is for BB86/92 and BSA30 units, and BBT-025 is for PF30/BB30 units. | |
| BBT-100 | TK Universal Puller |
| Hub and Suspension Pivot Tools – Blind Hole Puller Set | |
| This tool set allows you to pull bearings that are pressed into a housing as found in all hubs and pivots. Works with any bearing with an inside diameter between 8-32mm. | |
| BRT-002 | TK BB30/PF30 Tool |
| BB30/ PF BB30 Tools – BB30 Bottom Bracket Tool | |
| This tool allows you to safely remove and install the 6806 bearings into any model BB30 bottom bracket. It will now also work with any PF30 system. | |
| BRT-003 | TK BB86/92 Tool |
| Pressfit BB Tools – BB86 Cup Tool Set | |
| Tool for removal and install of press fit bb86/92 cups, and the bearings inside them. | |
| BRT-005 | TK Bearing Press |
| Hub and Suspension Pivot Tools – Hub Press | |
| This tool set is for pressing bearings into hubs, pivots or some bottom brackets. Contains 12 bushings to fit all the major size bearings used in hubs and pivots. | |
